TM 9-2320-365-20-1
2-707
CONTINUITY TEST
(1) Remove screw, lockwasher, and terminal
lug TL79 (LH) or TL70 (RH) from composite
front light light assembly. Discard lockwasher.
(2) Set multimeter to ohms.
(3) Connect positive (+) probe of multimeter to
terminal lug TL79 (LH) or TL90 (RH).
(4) Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(5) If continuity is not present, repair wire 3091
(para 2-40) or replace front lights cable
assembly (para 7-74).
(6) If continuity is present, replace composite front
light assembly (para 7-33).
(7) Install terminal lug TL79 (LH) or TL90 (RH),
lockwasher, and screw on composite front
light assembly.