TM 9-2320-365-20-1
2-1021
CONTINUITY TEST
(1) Loosen screw and disconnect connector
PX33 from WTEC II VIM.
(2) Set multimeter to ohms.
(3) Connect positive (+) probe of multimeter to
WTEC II VIM connector J116C3.
(4) Connect negative (-) probe of multimeter to
WTEC II VIM connector terminal J3 and note
reading on multimeter.
(5) If continuity is not present, replace WTEC II
VIM (para 8-6).
(6) Connect connector J116 to WTEC II VIM.
(7) Connect connector PX33 to WTEC II VIM and
tighten screw.