e13. VOLTS GAGE DOES NOT OPERATE OR IS INACCURATE (CONT)
2.
Is continuity present from
connector PX10 socket 1 to
a known good ground?
TEST OPTIONS
Continuity Test or
STE/ICE-R Test #91
REASON FOR QUESTION
If continuity is not present,
wire 3004 from connector
PX10 socket 1 to terminal
board TB2 position 9 is faulty.
KNOWN INFO
Circuit breaker CB77 OK.
POSSIBLE PROBLEMS
Faulty dashboard cable
assembly.
Faulty VOLTS gage.
CAUTION
Read CAUTION
on following page.
NO
YES
Replace VOLTS gage (para 7-14).
Repair wire 3004 from connector PX10
socket 1 to terminal board TB2 position 9
(para 2-40) or replace WTEC II dashboard
cable assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
TM 9-2320-365-20-1
2-346.2 Change 1