TM 9-2320-365-20-1
2-441
CONTINUITY TEST
(1) Remove four screws from lighted indicator
display.
(2) Remove lighted indicator display from
instrument panel assembly.
(3) Disconnect connector PX7 from lighted
indicator display.
(4) Set multimeter to ohms.
(5) Connect positive (+) probe of multimeter to
lighted indicator display terminal 7.
(6) Connect negative (-) probe of multimeter to
lighted indicator display terminal 24 and
note reading on multimeter.
(7) If continuity is present, repair wire 1681
(para 2-40) or replace WTEC II dashboard
cable assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).