3-4. ENGINE OIL FILTER REPLACEMENT
This task covers:
c. Follow-On Maintenance
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Wrench, Strap, Adjustable (Item 56, Appendix C)
Container (40 qt (38 L) capacity)
Oil, Lubricating, OE/HDO 30 (Item 46, Appendix D)
Filter, Oil (Item 22, Appendix G)
Packing, Preformed (Item 180, Appendix G)
Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
Do not remove oil filter while engine is hot.
Failure to comply may result in injury to
(1) Position container under oil pan (1).
(2) Remove oil pan plug (2) from oil pan (1).
(3) Remove preformed packing (3) from oil pan drain plug
(2). Discard preformed packing.