Change 1 2-1213
TM 9-2320-365-20-2
CONTINUITY TEST
(1) Remove six screws and cover from
110/208 VAC POWER DISTRIBUTION
PANEL.
(2) Loosen screw in terminal board TB4.
(3) Remove wire 1499D from terminal board
TB4.
(4) Set multimeter to ohms.
(5) Connect positive (+) probe of multimeter to
wire 1499D.
(6) Connect negative (-) probe of multimeter to
neutral socket of 110 VAC receptacle J230
and note reading on multimeter.
(7) If continuity is not present, repair or replace
wire 1499D (para 2-40).