TM 9-2320-365-20-2
2-1301
CONTINUITY TEST
(1) Disconnect M1079 12/24 vdc power cable
from van body (TM 9-2320-365-10).
(2) Remove two screws and cover from J236 24
vdc outlet box.
(3) Set multimeter to ohms.
(4) Connect positive (+) probe of multimeter to
inside of J236 positive (+) binding post.
(5) Connect negative (-) probe of multimeter to
front side of J236 positive (+) binding post
and note reading on multimeter.
(6) If continuity is not present, replace J236 24
vdc positive binding post (para 16-52).
(7) Install cover on J236 24 vdc outlet box with
two screws.