TM 9-2320-365-20-2
2-1347
CONTINUITY TEST
CONTINUITY TEST
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
110/208 vac IN connector pin G3.
(3) Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(4) If continuity is not present, repair or replace
wire 3085Q (para 2-40).
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
110/208 vac IN connector pin G4.
(3) Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(4) If continuity is not present, repair or replace
wire 3085R (para 2-40).