TM 9-2320-365-20-2
2-1097
CONTINUITY TEST
(1) Loosen terminal 1 screw on fan terminal board.
(2) Remove wire 3085X from fan terminal board.
(3) Set multimeter to ohms.
(4) Connect positive (+) probe of multimeter to
wire 3085X terminal lug.
(5) Connect negative (-) probe of multimeter to
other end of wire 3085X and note reading on
multimeter.
(6) If continuity is not present, repair or replace
wire 3085X.
(7) Position wire 3085X in fan terminal board.
(8) Tighten terminal 1 screw on fan terminal board.