VOLTAGE TEST
WARNING
Change 1 2-1479
Remove rings, bracelets, watches, necklaces,
and any other jewelry before working around
vehicle. Jewelry can catch on equipment and
cause injury or short across electrical circuits
and cause severe burns or electrical shock.
TM 9-2320-365-20-2
(1) Remove instrument panel assembly for
access (para 7-15).
(2) Start engine (TM 9-2320-365-10).
(3) Set multimeter to volts DC.
(4) Disconnect connector J115 (top connector)
from WTEC II TEPSS.
(5) Connect positive (+) probe of multimeter
to connector J115-2.
(6) Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(7) Connect positive (+) probe of multimeter
to connector J115-11.
(8) Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(9) If 12 to 14.5 vdc is not present at connector
J115-2 and J115-11, replace WTEC II
cab transmission harness (para 7-86).
(10) Shut down engine (TM 9-2320-365-10).