TM 939
-2320-365-20-3
15-5. REAR STABILIZER BAR REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Inspection
d. Assembly
e. Installation
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Trestle, Motor Vehicle Maintenance (2) (Item 45,
Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C)
Tools and Special Tools (Cont)
Socket, Socket Wrench (Item 68, Appendix B)
Wrench Set, Socket (Item 48, Appendix C)
Materials/Parts
Nut, Self-Locking (4) (Item 145, Appendix G)
Nut, Self-Locking (4) (Item 144, Appendix G)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Removal.
(1) Position trestles under rear stabilizer bar (1).
15-7