TM 9-2320-365-20-3
4-18. THROTTLE CONTROL CABLE REPLACEMENT/ADJUSTMENT
This task covers:
a. Removal
b. Installation
c. Adjustment
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Steering wheel removed (para 13-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Materials/Parts
Grease, Molybdenum Disulfide (Item 25, Appendix D)
Personnel Required
(2)
a. Removal.
(1) Position master power switch to on (TM 9-2320-365-10).
(2) Place wiper blades in the full left position (TM 9-2320-
365-10).
(3) Position master power switch to off (TM 9-2320-365-10).
(4) Disconnect batteries (para 7-48).
(5) Remove instrument panel assembly for access (para 7-
15).
WARNING
Retaining rings are under tension and can
act as projectiles when released causing
severe eye injury.
Use care when
removing retaining rings.
Failure to
comply may result in injury to personnel.
(6) Remove retaining ring (1) and bellcrank (2) from stud (3).
4-89