TM 9-2320-365-20-3
5-2. MUFFLER AND EXHAUST HEAT SHIELDS REPLACEMENT (CONT)
(7) Remove four nuts (12), washers (13), screws (14),
washers (15), and two resilient mounts (16) from muffler
support brackets (11). Discard nuts, washers, screws,
and resilient mounts.
NOTE
Perform step (8) on vehicle serial numbers 3092
and higher, and vehicles that have previously
had a muffler replaced.
Step (8) requires the aid of an assistant.
(8) Remove two self-locking nuts (17), washers (18), rubber
grommets (19), screws (20), washers (21), four rubber
grommets (22), and muffler (4) from muffler support
brackets (11).
Discard self-locking nuts and rubber
grommets.
5-4