TM 9-2320-365-20-3
6-5. THERMOSTAT REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Pan, Drain (Item 24, Appendix C)
Tools and Special Tools (Cont)
Goggles, Industrial (Item 15, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Materials/Parts
Gasket and Preformed Packing Set (Item 42.1,
Appendix G)
Adhesive (Item 6, Appendix D)
a. Removal.
(1) Position drain pan under thermostat housing (1).
(2) Remove two screws (2) and washers (3) from outlet
housing (4).
(3) Remove outlet housing (4) from thermostat housing (1).
(4) Remove thermostat (5) from thermostat housing (1).
(5) Remove thermostat gasket (6) from thermostat housing
(1). Discard thermostat gasket.
(6) Remove thermostat gasket debris from outlet housing (4)
and thermostat housing (1).
Change 1
6-25