7-3. ALTERNATOR BELTS REPLACEMENT (CONT)
(1) Position two alternator belts (1) on pulley (2).
Tension bracket adjustment varies for new or
reinstalled belts. New belts must be adjusted
to 110-130 lbs (489-478 N), reinstalled belts
must be adjusted to 80-100 lbs (356-444 N).
Failure to comply may result in early belt
Steps (2) and (3) require the aid of an
Use square hole in tension bracket to
apply tension to alternator belts.
(2) Push tension bracket (3) down until belt tension gage
indicates correct tension for new or reinstalled belts (1).
(3) Maintain belt tension and tighten two screws (4).
(4) Connect air hose (5) to fan clutch (6).