TM 9-2320-365-20-3
7-24. FLASHER UNIT REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
Kick panel removed (para 16-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
a. Removal.
(1) Remove two screws (1), washers (2), and flasher unit (3)
from dashboard (4).
(2) Disconnect connector PX20 (5) from flasher unit (3).
b. Installation.
(1) Connect connector PX20 (5) to flasher unit (3).
(2) Install flasher unit (3) on dashboard (4) with two washers
(2) and screws (1).
c. Follow-On Maintenance.
(1) Install kick panel (para 16-3).
(2) Connect batteries (para 7-48).
(3) Check turn signal and hazard lights operation (TM 9-
2320-365-10).
End of Task.
7-125