7-34. HEADLIGHT AND HOUSING REPLACEMENT/REPAIR/ADJUSTMENT
This task covers:
Batteries disconnected (para 7-48).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Headlight Adjustment Screen (Item E-5, Appendix E)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Grommet, Nonmetallic (3) (Item 51, Appendix G)
Lockwasher (3) (Item 75, Appendix G)
Both headlights are removed the same way.
Left headlight shown.
Perform steps (1) through (3) to remove lamp.
(1) Remove three screws (1) and retaining ring (2) from
(2) Remove lamp (4) from housing (3).
Tag connectors and connection points prior to
Connector numbers are the same on left and
(3) Disconnect connectors 18, 91, and 17 (5) from housing