TM 9-2320-365-20-3
NOTE
Remove battery terminal covers as required.
(4) Loosen two terminal screws (8) on battery ground cable
(3).
(5) Remove battery ground cable (3) from battery terminals
BT4 E2 (9) and BT3 E2 (10).
(6) Remove nut (11) from battery 24 VDC cable (12).
NOTE
Perform step (7) on vehicles equipped with
cargo arctic heater.
(7) Remove terminal lug TL1 (13) from battery 24 VDC
cable (12).
(8) Remove terminal lug TL49A (14) and battery tester
terminal lug (15) from battery 24 VDC cable (12).
(9) Remove screw (16) and clamp (17) from battery hold-
down bracket (18).
(10) Remove battery tester (19) from spring clip (20).
(11) Remove two screws (21) and spring clip (20) from
battery hold-down bracket (18).
7-185