TM 9-2320-365-20-3
(4) Remove nut (8) from battery 24 vdc cable (9).
NOTE
Perform step (5) on vehicles equipped with
cargo arctic heater.
(5) Remove terminal lug TL1 (10) from battery 24 vdc cable
(9).
(6) Remove terminal lug TL49A (11) and battery tester
terminal lug (12) from battery 24 vdc cable (9).
(7) Remove four self-locking nuts (13), washers (14), screws
(15), and eyelet (16) from NATO power cable (17).
Discard self-locking nuts.
(8) Remove NATO power cable (17) and terminal lugs
TL49A (11) and TL50A (5) from bracket (18) and battery
box (19).
b. Installation.
(1) Position terminal lugs TL49A (1) and TL50A (2), and
NATO power cable (3) in bracket (4) and battery box (5).
(2) Install NATO power cable (3) and eyelet (6) on bracket
(4) with four screws (7), washers (8), and self-locking
nuts (9).
7-255