TM 9-2320-365-20-3
(37) Remove self-locking nut (72), screw (73), and clamp (74)
from left frame rail (75).
(38) Remove clamp (74) from engine control cable assembly
(53).
(39) Remove engine control cable assembly (53) from
vehicle.
b. Installation.
NOTE
Install plastic cable ties as required.
(1) Position engine control cable assembly (1) in vehicle.
(2) Install clamp (2) on engine control cable assembly (1).
(3) Install clamp (2) on left frame rail (3) with screw (4) and
self-locking nut (5).
(4) Install two clamps (6) on engine control cable assembly
(1).
(5) Install two clamps (6) on brackets (7 and 8) with two
screws (9) and self-locking nuts (10).
7-285