TM 9-2320-365-20-3
7-72. ENGINE CONTROL CABLE ASSEMBLY REPLACEMENT (CONT)
(6) Install clamps (11 and 12) on engine control cable
assembly (1).
(7) Install clamps (11 and 12) on clamps (13 and 14) with
two screws (15) and self-locking nuts (16).
(8) Connect connector P41 (17) to coolant temperature gage
sensor connector (18).
(9) Connect connector clamp (19) on connector P41 (17).
(10) Install dust boot (20) on engine control cable assembly
(1).
(11) Position terminal lug TL110 (21) on voltage regulator
(22) with washer (23) and self-locking nut (24).
(12) Tighten self-locking nut (24) to 25 lb-in. (3 N·m).
(13) Position dust boot (20) on terminal lug TL110 (21).
(14) Install dust boot (25) on engine control cable assembly
(1).
(15) Position terminal lug TL35 (26) on voltage regulator (22)
with washer (27) and self-locking nut (28).
(16) Tighten self-locking nut (28) to 25 lb-in. (3 N·m).
(17) Position dust boot (25) on terminal lug TL35 (26).
7-286