TM 9-2320-365-20-3
(6) Position terminal lug TL55 (6) on starter solenoid
terminal (7) with nut (8).
(7) Tighten nut (8) to 30 lb-ft (41 N·m).
(8) Position terminal lug TL26 (9) on starter solenoid
terminal (10) with nut (11).
(9) Tighten nut (11) to 31 lb-in. (4 N·m).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(10) Apply adhesive to nuts (8 and 11).
(11) Position terminal lugs TL25 (12) and TL53 (13) on
starting motor terminal (14) with nut (15).
(12) Tighten nut (15) to 33-37 lb-ft (45-50 N·m).
(13) Apply adhesive to terminal lugs TL25 (12) and TL53 (13)
and starting motor terminal (14).
Change 1
7-350.1