TM 9-2320-365-20-3
Table 8-1. Diagnostic Code List and Description (Cont)
MAIN
CODE
SUB
CODE
DESCRIPTION
PERFORM
TROUBLESHOOTING TASK
69
41
ECU malfunction
f7. If fault persists, replace
WTEC II TEPSS (para 8-2).
b. Clearing Active Diagnostic Codes.
NOTE
Active diagnostic codes can only be cleared
when transmission output speed equals zero
and no output speed sensor fault is active.
(1) Press and hold MODE button (1), approximately three
seconds, until WTEC II TEPSS tone sounds for 1/2
second.
(2) Release MODE button (1).
c. Clearing Historic Diagnostic Codes.
(1) Press and hold MODE button (1), approximately 10
seconds, until tone sounds.
(2) Release MODE button (1).
Change 1
8-12.1/(8-12.2 Blank)