TM 9-2320-365-20-3
8-10. TRANSMISSION OIL COOLER REPLACEMENT (CONT)
NOTE
Perform steps (18) through (20) on vehicles
equipped with transmission oil cooler hoses.
(18) Disconnect transmission oil cooler hoses (13 and 14)
from two fittings (15).
(19) Remove two fittings (15) from transmission oil cooler (5).
(20) Remove two preformed packings (16 and 17) from
fittings (15). Discard preformed packings.
NOTE
Vehicles may be equipped with either a
corrosive enhanced clamp or a non-corrosive
enhanced clamp. Corrosive enhanced clamps
have a self-locking nut and interior lining. When
removing a non-corrosive enhanced clamp,
replace it with a corrosive enhanced clamp.
Steps (21) and (22) require the aid of an
assistant.
Perform step (21) on vehicles not equipped with
corrosive enhanced clamp.
(21) Remove screw (18), clamp (19), and transmission oil
cooler (5) from bracket (20). Discard clamp and screw.
8-40
Change 1