TM 9-2320-365-20-3
NOTE
Perform steps (8.2) and (8.3) on vehicles
equipped
with
corrosion
enhanced
clamps.
(8.2) Remove two self-locking nuts (14.2) from clamps (13).
Discard self-locking nuts.
(8.3) Remove secondary air tank (14) from two clamps (13).
NOTE
Note orientation of fittings prior to removal.
(9)
Remove 90-degree fitting (2) from one-way check valve
(15).
(10)
Remove one-way check valve (15) from secondary air
tank (14).
(11)
Remove 90-degree fitting (4) from two-way check valve
(16).
(12)
Remove two-way check valve (16) from reducer fitting
(17).
(13)
Remove reducer fitting (17) from secondary air tank
(14).
Change 1
11-107