TM 9-2320-365-20-3
NOTE
Perform steps (5.2) and (5.3) on vehicles
equipped
with
corrosion
enhanced
clamps.
(5.2) Remove two self-locking nuts (9) from clamps (10).
Discard self-locking nuts.
(5.3) Remove primary air tank (11) from clamps (10).
NOTE
Note orientation of fittings prior to
removal.
(6) Remove run tee fitting (8) from primary air tank (11).
(7) Remove 45-degree fitting (5) from primary air tank (11).
(8) Remove branch tee fitting (3) from one-way check valve
(12).
(9) Remove one-way check valve (12) from primary air tank
(11).
Change 1
11-112.1/(11-112.2 Blank)