12-9. REAR AXLE CENTRAL TIRE INFLATION SYSTEM (CTIS) QUICK RELEASE VALVE
This task covers:
c. Follow-On Maintenance
Engine shut down (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape (Item
21, Appendix D)
Antiseize Compound (Item 63, Appendix D)
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
Tag air hoses and connection points prior to
(1) Disconnect three air hoses (1) from quick release valve
(2) Remove two nuts (3) and washers (4) from screws (5).
(3) Remove two screws (5), washers (6), and quick release
valve (2) from frame (7).