13-7. POWER STEERING HOSES AND TUBE REPLACEMENT
This task covers:
a. Return Hose Removal
b. Return Hose Installation
c. Pressure Hose Removal
d. Pressure Hose Installation
e. Suction Hose and Tube Removal
f. Suction Hose and Tube Installation
g. Follow-On Maintenance
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Pan, Drain (Item 24, Appendix C)
Dispensing Pump, Hand Driven (Item 5,
Tools and Special Tools (Cont)
Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B)
Cap and Plug Set (Item 15, Appendix D)
Ties, Cable, Plastic (Item 76, Appendix D)
Oil, Lubricating, OE/HDO 10 (Item 43, Appendix D)
Nut, Self-Locking (2) (Item 134, Appendix G)
Clamp (Item 7, Appendix G)
Clamp (Item 8, Appendix G)
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Return Hose Removal.
Cap or plug hydraulic connections to prevent
contamination of power steering system.
Failure to comply may result in damage to
(1) Loosen hose clamp (1) on return hose (2).
(2) Remove return hose (2) from steering gear box (3).