TM 9-2320-365-20-3
(2) Install pressure hose (1) on steering gear box (3).
NOTE
Install plastic cable ties as required.
(3) Install two clamps (4), screws (5), and self-locking nuts
(6) on pressure hose (1).
e. Suction Hose and Tube Removal.
CAUTION
Cap or plug hydraulic connections to prevent
contamination of power steering system.
Failure to comply may result in damage to
equipment.
(1) Loosen hose clamp (1) on suction hose (2).
(2) Remove suction hose (2) from suction tube (3).
13-21