TM 9-2320-365-20-4
16-10. FENDER AND SPLASH GUARD REPLACEMENT (CONT)
j. M1081 Front Fender Installation.
NOTE
Left and right M1081 front fenders are
installed the same way. Left side shown.
(1) Position step (1) and three brackets (2) on front fender
(3) with three screws (4) and self-locking nuts (5).
(2) Tighten three self-locking nuts (5) to 18-22 lb-ft (24-30
N·m).
(3) Install 12 spacers (6) in front fender (3).
NOTE
Step (4) requires the aid of an assistant.
(4) Position front fender (3) on cab (7) with 12 washers (8)
and screws (9).
(5) Tighten 12 screws (9) to 18-22 lb-ft (24-30 N·m).
(6) Position three washers (10) and screws (11) in front
fender (3).
(7) Tighten three screws (11) to 18-22 lb-ft (24-30 N·m).
16-92