TM 9-2320-365-20-4
(6) Position two spacers (12), center seat belt mounting
bracket (13), washer (14), and screw (15) on rear
bulkhead (10).
(7) Tighten screw (15) to 30-35 lb-ft (41-47 N·m).
(8) Position spacer (16), seat belt retractor (17), seat belt
(18), washer (19), and screw (20) on side of cab (21).
(9) Tighten screw (20) to 30-35 lb-ft (41-47 N·m).
(10) Close plastic cover (22).
(11) Position spacer (23), seat belt mounting bracket (24),
washer (25), and screw (26) on side of cab (21).
(12) Tighten screw (26) to 30-35 lb-ft (41-47 N·m).
(13) Install plastic cover (27) on screw (26).
c. Follow-On Maintenance.
Install cab storage boxes (para 16-17).
End of Task.
16-115