16-19. M1079 VAN BODY REPLACEMENT (CONT)
(4) Remove two lynch pins (9) from stud (10).
(5) Remove two slotted nuts (11), washers (12), stud (10),
and spring (13) from sub-frame (8).
(6) Perform steps (2) through (5) on right side of van body.
Van body weighs approximately 3,360 lbs
(1525 kgs) empty. Attach a suitable lifting
device prior to removal. Failure to comply
may result in serious injury or death to
Guide ropes must be attached at opposite
corners of van body to aid in controlling van
body during removal. Failure to comply may
result in serious injury or death to personnel.
Center of gravity will change depending on
equipment installed in van body. Attach and
adjust lifting device so that van body lifts
Failure to comply may result in
serious injury or death to personnel or
damage to equipment.
Step (7) requires the aid of two assistants.
(7) Remove van body (14) from sub-frame (8).