TM 9-2320-365-20-4
16-24. M1079 SLING SPREADER AND GUIDES REPLACEMENT (CONT)
NOTE
Both sling guides are removed the same
way. Left side shown.
(15) Remove two screws (13) and end cap (4) from sling
guide (2).
(16) Remove screw (14) from sling guide (2).
(17) Remove clevis pin (1) from sling guide (2).
(18) Remove sling guide (2) from sling spreader (3).
(19) Perform steps (15) through (18) on right side of sling
spreader (3).
b. Installation.
NOTE
Both sling guides are installed the same way.
Left side shown.
(1) Install sling guide (1) in sling spreader (2).
(2) Install clevis pin (3) in sling guide (1) with sling guide in
extended position.
(3) Install screw (4) in sling guide (1).
(4) Install end cap (5) on sling guide (1) with two screws (6).
(5) Perform steps (1) through (4) on right side of sling
spreader (2).
16-162