Dry Cleaning Solvent (P-D-680) is TOXIC and
Wear protective goggles and
gloves; use only in well ventilated area;
avoid contact with skin, eyes, and clothes,
and do not breathe vapors. Keep away from
heat or flame. Never smoke when using
solvent; the flashpoint for Type I Dry
Cleaning Solvent is 100°F (38°C) and for
Type II is 130°F (50°C). Failure to comply
may result in injury or death to personnel.
If personnel become dizzy while using Dry
Cleaning Solvent, immediately get fresh air
and medical help. If Dry Cleaning Solvent
contacts skin or clothes, flush with cold
If Dry Cleaning Solvent contacts
eyes, immediately flush eyes with water and
get immediate medical attention. Failure to
comply may result in injury to personnel.
(44) Clean inside edges of RH door (5) with dry cleaning
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
adhesive, solvent, or sealing compound
immediately with soap and water. Failure
to comply may result in injury to
Apply adhesive no sooner than 30 minutes,
nor later than eight hours, after cleaning.
(45) Apply adhesive to inside edge of RH door (5).
(46) Install gasket (60) on RH door (5).