TM 9-2320-365-20-4
NOTE
Steps (3) and (4) require the aid of an assistant.
Note position of terminal lugs prior to removal.
Remove plastic cable ties as required.
(3) Remove nut (6), lockwasher (7), washer (8), and nine
terminal lugs (9) from chassis ground lug (10). Discard
lockwasher.
(4) Remove nut (11), lockwasher (12), and washer (13) from
chassis ground lug (10). Discard lockwasher.
(5) Remove chassis ground lug (10) from 110/208 vac
power entry panel (5).
(6) Remove washer (14), lockwasher (15), nut (16), washer
(17), lockwasher (18), and nut (19) from chassis ground
lug (10).
b. Installation.
(1) Install nut (1), lockwasher (2), washer (3), nut (4),
lockwasher (5), and washer (6) on chassis ground lug
(7).
(2) Install chassis ground lug (7) in 110/208 vac power entry
panel (8).
16-465