TM 9-2320-365-20-4
CAUTION
Ensure cab latch brackets on each side of
the cab support bridge rest squarely on the
support pins.
(6) Tighten three screws (7) to 34-44 lb-ft (44-60 N·m).
(7) Raise cab (TM 9-2320-366-10-1).
(8) Tighten two self-locking nuts (5) to 34-44 lb-ft (44-60
N·m).
(9) Lower cab (TM 9-2320-366-10-1).
c. Cab Latch Bracket Removal.
(1) Raise cab (TM 9-2320-365-10).
(2) Install cab support tool on engine rear lifting eye (1).
(3) Lower cab until cab rests on cab support tool (TM 9-
2320-365-10).
Change 1
16-489