TM 9-2320-365-20-4
18-3. WINDSHIELD WIPER AND NOZZLE REPLACEMENT
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 35, Appendix C)
Materials/Parts
Washer, Spring (Item 279, Appendix G)
Wiper, Refill (Item 283, Appendix G)
a. Removal.
NOTE
All windshield wipers are removed the same
way. Left side shown.
(1) Disconnect windshield washer hose (1) from fitting (2).
(2) Lift cover (3) at base of wiper arm (4).
(3) Remove nut (5) and spring washer (6) from wiper arm
shaft (7). Discard spring washer.
NOTE
Mark position of wiper arm prior to removal.
(4) Remove wiper arm (4) from wiper arm shaft (7).
18-6
Change 1