TM 9-2320-365-20-4
18-7. CAB MIRROR REPLACEMENT (CONT)
(3) Remove self-locking nut (9), washer (10), screw (11),
mirror arm (4), and clip (12) from lower bracket (13).
Discard self-locking nut.
(4) Remove four screws (14), washers (15), and brackets (8
and 13) from cab (16).
b. Installation.
NOTE
Left and right cab mirrors are installed the
same way. Left side shown.
(1) Position brackets (1 and 2) on cab (3) with four washers
(4) and screws (5).
(2) Tighten four screws (5) to 80-98 lb-in. (9-11 N·m).
18-24