Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves;
use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do breathe
vapors. Keep away from heat or flame. Never smoke when using solvent; the flashpoint or
Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is 130°F (50°C). Failure to
comply may result in serious injury or death to personnel.
If personnel become dizzy while using Dry Cleaning Solvent, immediately get fresh air and
medical help. If Dry Cleaning Solvent contacts skin or clothes, flush with cold water. If Dry
Cleaning Solvent contacts eyes, immediately flush eyes with water and get immediate
medical attention. Failure to comply may result in injury to personnel.
Clean all metal parts with dry cleaning solvent.
(1) Install clamp (1) on mast (2) with two lockwashers (3),
washers (4), and screws (5).
(2) Install quick release pin (6) on housing (7) with
lockwasher (8), washer (9), and screw (10).
(3) Position housing (7) on mast (2).
(4) Install quick release pin (6) in housing (7).