Tiedowns are positioned with eyebolts toward
four corners of cargo bed.
(5) Install two tiedowns (2 and 3) in four crane pockets (8).
Ensure quick release pins are installed
through both sides of crane pockets. Failure
to comply may result in change to equipment.
(6) Install four plugs (7) in cargo bed frame (9) with four
quick release pins (6).
Ensure at least two whole threads are
showing past nuts after installation. Failure to
comply may result in damage to equipment.
Left and right clamps are installed the same way.
Left clamp shown.
Perform steps (7) and (8) on M1078.
(7) Install clamp (10) on frame rail (9) and subframe rail (11)
with spacer (12), tie-rod (13), and two self-locking nuts
(8) Perform step (7) on right clamp.