TM 9-2320-365-20-5
21-7. SMALL ARMS MOUNT REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 35, Appendix C)
a. Removal.
NOTE
All three small arms mounts are removed the
same way. Drivers side shown.
(1) Remove two screws (1), washers (2), and storage rack
(3) from back wall of cab (4).
(2) Remove two screws (5), washers (6), and weapon
support (7) from support (8).
21-12