TM 9-2320-365-20-5
Section II. MAINTENANCE PROCEDURES
22-2. WARNING LIGHT CABLE ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
Rear cab liner removed (para 16-13).
Kick panel removed (para 16-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Material/Parts
Ties, Cable, Plastic (Item 76, Appendix D)
a. Removal.
(1) Remove dustcap (1) from connector J62 (2).
(2) Remove screw (3) and dustcap (1) from cab (4).
(3) Remove three screws (5) and connector J62 (2) from
cab (4).
(4) Remove three screws (6) and washers (7) from PDP (8).
(5) Remove three screws (9) from PDP (8).
(6) Lift PDP (8) outward to gain access.
22-2