Personnel Required
(2)
References
TM 9-4910-571-12&P
START
WARNING
CAUTION
Read WARNING and
CAUTION on
following page.
1.
KNOWN INFO
TEST OPTIONS
Voltage Test or
STE/ICE-R Test #89
REASON FOR QUESTION
POSSIBLE PROBLEMS
Turn signals illuminate.
Rear hazard lights illuminate.
NO
Faulty dashboard cable
assembly.
Faulty turn signal switch.
YES
Is volts DC pulse present at
connector J19 socket 5?
If volts DC pulse is not
present, wire 1566 is faulty.
If volts DC pulse is present,
turn signal switch is faulty.
e54A. FRONT HAZARD LIGHTS DO NOT ILLUMINATE
INITAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
STE/ICE-R (Item 39, Appendix C)
Multimeter, Digital (Item 22, Appendix C)
Repair wire 1566 from connector PX14
socket 2 to connector J19 socket 5 (para
2-40) or replace WTEC II dashboard
cable assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
Replace turn signal
switch (para 7-25).
TM 9-2320-365-20-1
2-678 Change 1
