e56.  FRONT AND REAR HAZARD LIGHTS DO NOT ILLUMINATE (CONT) 3.             KNOWN INFO                         TEST OPTIONS                REASON FOR QUESTION     Circuit breaker CB71 OK. Turn signals illuminate. Hazard lights switch OK.        POSSIBLE PROBLEMS        Faulty dashboard cable assembly. Faulty relay K9. Is 12 VDC present at relay K9 terminal 86? Voltage Test or STE/ICE-R Test #89 If 12 VDC is not present, wire 1514 is faulty. Repair wire 1514 from relay K9 terminal 86 to circuit breaker CB 74 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). YES NO 2.             KNOWN INFO                     POSSIBLE PROBLEMS                   TEST OPTIONS                REASON FOR QUESTION     Faulty dashboard cable assembly. Faulty relay K9. Circuit breaker CB71 OK. Turn signals illuminate. Hazard lights switch OK. Is 12 VDC present at relay K9 terminal 30? Voltage Test or STE/ICE-R Test #89 If 12 VDC is not present, wire 1566 is faulty. Repair wire 1566 from relay K9 terminal 30 to circuit breaker CB 71 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). YES NO WARNING Read WARNING on following page. WARNING Read WARNING on following page. TM 9-2320-365-20-1 2-684          Change 1