WARNING
(1) Remove plug from adapter fitting on inlet side
of fuel filter base.
(2) Prepare STE/ICE-R Test #50 (TM 9-4910-571-
12&P) to adapter fitting.
(3) Start engine (TM 9-2320-365-10).
(4) Perform STE/ICE-R Test #50 (TM 9-4910-571-
12&P).
(5) Raise idle speed to 2000 rpm for 10 seconds.
(6) Pressure should read between 39 psi and
58 psi.
(7) Record test results.
(8) Shut down engine (TM 9-2320-365-10).
(9) If pressure is below 39 psi, notify DS
Maintenance.
Diesel fuel is flammable. If fuel is spilled,
clean it up immediately. Failure to comply
may result in serious injury or death to
personnel.
TM 9-2320-365-20-1
Change 1 2-100.5
PRESSURE TEST
