e18E. WATER TEMP GAGE DOES NOT ILLUMINATE (CONT)
CAUTION
Read CAUTION
on following page.
5.
TEST OPTIONS
KNOWN INFO
POSSIBLE PROBLEMS
Faulty dashboard cable
assembly.
Faulty WATER TEMP gage.
Continuity Test or
STE/ICE-R Test #91
REASON FOR QUESTION
If continuity is not present,
wire 1908 is faulty.
Replace WATER TEMP gage
(para 7-14).
NO
KNOWN INFO
POSSIBLE PROBLEMS
Faulty dashboard cable
assembly.
Faulty WATER TEMP gage.
CAUTION
Read CAUTION
on following page.
Is continuity present from
connector PX11 socket 1 to
a known good ground?
TEST OPTIONS
Continuity Test or
STE/ICE-R Test #91
REASON FOR QUESTION
If continuity is not present,
wire 3020 is faulty. If
continuity is present, WATER
TEMP gage is faulty.
YES
NO
6.
Is continuity present from
connector PX11 socket 2 to
connector PX24 pin 2?
Circuit breaker CB70 OK.
Main light switch OK.
Dimmer switch OK.
Circuit breaker CB70 OK.
Main light switch OK.
Dimmer switch OK.
YES
Repair wire 1908 from connector PX11
socket 2 to connector PX24 socket 2
(para 2-40) or replace WTEC II dashboard
cable assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
Repair wire 3020 from connector PX11
socket 1 to connector PX6 socket 1 (para
2-40) or replace WTEC II dashboard
cable assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
TM 9-2320-365-20-1
2-380.26 Change 1
