TM 9-2320-365-20-1
2-387
CONTINUITY TEST
(1) Remove instrument panel assembly for access
(para 7-15).
(2) Disconnect connector PX15 from main light
switch.
(3) Set multimeter to ohms.
(4) Position main light switch to SER DRIVE
(TM 9-2320-365-10).
(5) Position main light switch auxiliary lever to
PANEL BRT (TM 9-2320-365-10).
(6) Connect positive (+) probe of multimeter to
main light switch terminal F.
(7) Connect negative (-) probe of multimeter to
main light switch terminal B and note
reading on multimeter.
(8) If continuity is not present, replace main
light switch (para 7-17).
(9) Position main light switch to OFF
(TM 9-2320-365-10).
