TM 9-2320-365-20-2
2-1165
CONTINUITY TEST
(1) Remove six screws and cover from 110/208
VAC POWER DISTRIBUTION PANEL.
(2) Loosen screw in terminal board TB4.
(3) Remove wire 1499E from terminal board TB4.
(4) Set multimeter to ohms.
(5) Connect positive (+) probe of multimeter to
wire 1499E.
(6) Connect negative (-) probe of multimeter to
neutral socket of 110 vac receptacle J234 and
note reading on multimeter.
(7) If continuity is not present, repair or replace
wire 1499E (para 2-40).
