TM 9-2320-365-20-2
3-2. LIFTING PLATE REPLACEMENT (CONT)
b. Installation.
(1) Position rear lifting plate (1) on engine (2) with four
washers (3) and screws (4).
(2) Tighten four screws (4) to 47 lb-ft (64 N·m).
(3) Position front lifting plate (5) on engine (2) with five
washers (6) and screws (7).
(4) Tighten five screws (7) to 47 lb-ft (64 N·m).
(5) Connect air compressor inlet coolant tube (8) to fitting (9)
on thermostat housing (10).
3-4