Change 1 2-1219
TM 9-2320-365-20-2
CONTINUITY TEST
(1) Loosen screw in cover.
(2) Open cover on relay box assembly.
(3) Set multimeter to ohms.
(4) Connect positive (+) probe of multimeter to
K35 relay base terminal 9.
(5) Connect negative (-) probe of multimeter to
output terminal on circuit breaker CB9 and
note reading on multimeter.
(6) If continuity is not present, repair or replace
wire 701C (para 2-40).
(7) Install cover on 110/208 VAC POWER
DISTRIBUTION PANEL with six screws.
